Get more mileage out of your workboots. Kg's Boot Guard offers superior protection from toe wear, water seepage along the welt, and seam erosion. The boot guard can be applied to new or used boots and bonds to leather, rubber, Cordura, vinyl, and even to exposed steel.

Kg's Boot Guard is tough and permanent! It will not crack, peel, or flake off. Simply brush on the first coat, let dry for two hours, brush on one last coat, and dry overnight. The applicator can be cleaned with mineral spirits for reuse.
Watch the video.

Each jar typically contains enough coverage for at least three boot applications.

Read the Kg's Boot Guard
material safety data sheet.

View more about faster drying times. Faster Drying Times
Kg's Boot Guard is a polyurethane mix that requires high humidity and a temperature of 55 degrees Fahrenheit or above for normal drying times. In certain climates especially during the winter months when temperature and humidity levels drop drying times may significantly increase. To speed up drying times LIGHTLY mist the freshly applied Kg's Boot Guard with water and place in front of a fan. Repeat every hour until completely dried. For more information call 1-866-547-2668.